tSML - FO Modules 19"/ 0.5U

tSML - FO Module 19"/0.5U straight 4x MPO/MTP® Male/24x LC Duplex 50/125µ OM3



The end faces of the connectors are optimized by means of Lasercleaving and machine polish. The MPO/MTP® plug has a defined fiber hieght of 1 - 3.5µ. The max. adjacent fiber height difference is 0.2µm and for all fibers 0.3µm. All system components (modules, trunk cables and patch cords) are co-ordinated for the reaching of the performance particularly. The module is marked with sequential serial number and article number. The modules are ROHS compliant.

Technical data

Entry 4 x MPO/MTP® Male Adapter (aqua) back
Exit 24 x LC Duplex Adapter (aqua) front
Interferometer, Insertion Loss, Return Loss and Visual Final Inspection; all measured values are electronically archived
  QS-Managementsystem ISO 9001, ISO 14001 and TL 9000
  • Box stainless steel
    Front plate stainless steel
    Dimensions 19", 0.5U, depth 11 cm
  • Type LC Duplex
    Application Multimode OM3
    Design One-Piece without flange
    Connector style SC simplex
    Color Aqua
    Material Plastic
    Sleeve Zirkonia Staight Split
    Shutter --
    Manufacturer tde
    Type MPO/MTP®
    Application Multimode OM3
    Design without Flange
    Connector style SC Simplex
    Key Orientation Type A, Key up/down
    Color Aqua
    Material Plastic
    Sleeve --
    Shutter --
    Standards IEC 61754-7
    TIA 604-5
    Manufacturer US Conec

  • Connector
    Type MPO/MTP® Male Push Pull Locking (aqua)
    Ferrule 12 Fiber MM Elite® ferrule, PPS
    Boot colour Black
    Manufacturer tde/US Conec
    Optical Performance
    Insertion loss typ.
    Insertion loss max.
    Return loss min.
    50/125µ OM3
    850 nm
    ≤ 0.14 dB
    0.25 dB
    35 dB
    Connector Type LC Unibody Simplex
    Housing Plastic, Aqua
    Ferrule Zirkonia Staight Split, Spring-loaded Axially
    Ferrule Hole 126µ
    Mating Cycles 1.000
    Operating Temperature -40°C up to +75°C
    Strain Relief to 100 N
    Manufacturer tde
    Optical performance
    FiberTypeWavelengthInsertion loss typ.Insertion loss max.Return loss min.
    50/125µ OM3 LC 850 nm ≤ 0.20 dB 0.35 dB 30 dB
  • Type Corning ClearCurve® 50/125µ OM3 multimode fiber
    Optimized Data Rate over Distance 40/100 Gb/s über 140 m*
    10 Gb/s over 300 m
    1 Gb/s over 1000 m 
    Standard Compliance ISO/IEC 11801: type OM3 fiber
    IEC 60793-2-10: type A1a.2 fiber
    TIA/EIA: 492AAAC-B
    ITU: ITU G651.1


    Distances specified in the 40G/100G per IEEE 802.3ba standard are 150m on OM4 and 100m on OM3; Corning fibers are manufactured to tighter dispersion specifications and thereby support the extended distances shown in the table (assuming cable attenuation ≤3.0 dB/km and same 1.0 dB of connector loss for OM3 that the standard requires for OM4).

    Optical Specifications
    Bandwidth High Performance EMB* (MHz.km): 2000 at 850 nm only
    Legacy Performance EMB* (MHz.km): 1500 at 850 nm / 500 at 1300 nm  
    Attenuation At 850 nm max. ≤ 2.3 dB/km
    At 1300 nm max. ≤ 0.6 dB/km
    Macrobend Loss Mandrel Radius (mm): 37.5 / 15 / 7.5
    Number of Turns: 100 / 2 / 2
    Induced Attenuation (dB) at 850 nm: ≤ 0.05 / ≤ 0.1 / ≤ 0.2
    Induced Attenuation (dB) at 1300 nm: ≤ 0.15 / ≤ 0.3 / ≤ 0.5
    Numerical Aperture 0.200 ± 0.015
    * Ensured via miniEMBc, per TIA/EIA 455-220A and IEC 60793-1-49, for high performance laser-based systems (up to 10 Gb/s).
    ** OFL BW, per TIA/EIA 455-204 and IEC 60793-1-41, for legacy and LED-based systems (typically up to 100 Mb/s).
    Dimensional Specifications
    Core Diameter 50.0 ± 2.5 µm
    Cladding Diameter 125.0 ± 1.0 µm
    Core-Clad Concentricity ≤ 1.5 µm
    Cladding Non-Circularity ≤ 1.0%
    Core Non-Circularity ≤ 5.0%
    Coating Diameter 242 ± 5 µm
    Coating-Cladding Concentricity < 12 µm
    Enviromental TestTest ConditionInduced Attenuation 850 nm & 1300 nm (dB/km)
    Temperature Dependence -60°C to +85°C ≤ 0.10
    Temperature Humidity Cycling -10°C to +85°C and 4% to 98% RH ≤ 0.10
    Water Immersion 23°C ± 2°C ≤ 0.20
    Heat Aging 85°C ± 2°C ≤ 0.20
    Damp Heat 85°C at 85% RH ≤ 0.20
    Operating Temperature Range -60°C to +85°C   
    Mechanical Specifications
    Proof Test The entire fiber length is subjected to a tensile stress ≥ 100 kpsi (0.7 GN/m²).
    Length Fiber lengths available up to 17.6 km/spool.
    Performance Characterizations
    Refractive Index Difference 1%
    Effective Group Index of Refraction 850 nm: 1.480
    1300 nm: 1.479
    Fatigue Resistance Parameter (nd) 20
    Coating Strip Force Dry: 0.6 lbs (2.7N)
    Wet: 14 days in 23°C water soak: 0.6 lbs (2.7N)
    Cromatic Dispersion Zero Dispersion Wavelength (λ0): 1295 nm ≤ λ0 ≤ 1315 nm
    Zero Dispersion Slope (S0): ≤ 0.101 ps/(nm²*km)
P/N Description Quantity
TSML-M24LCADK/MPP09E tSML - FO Module 19"/0.5U straight 4x MPO/MTP® Male/24x LC APC Duplex 9/125µ OS2
TSML-M24LCDK/MPP09E tSML - FO Module 19"/0.5U straight 4x MPO/MTP® Male/24x LC Duplex 9/125µ OS2
TSML-M24LCDK/MPP50G3 tSML - FO Module 19"/0.5U straight 4x MPO/MTP® Male/24x LC Duplex 50/125µ OM3
TSML-M24LCDK/MPP50G4 tSML - FO Module 19"/0.5U straight 4x MPO/MTP® Male/24x LC Duplex 50/125µ OM4



Announcement texts

Media objects

tSML - Flyer EN 24.03.2016