tML® 24 - FO Modules MPO/MTP®
tML® 24 - FO Module 1x 24F MPO/MTP®/12x LC Duplex w. shutter 50/125µ OM4
The utility patent protected tML® 24 - FO Module MPO/MTP® is intended for the installation in the tML® Rack Mount Enclosure 1U (for 8 x Modules). The module configuration guarantees an extremely easy migration from 1GbE to 100GbE because there can always be worked on both sides with uniformly configured modules and patch cables. The tML® 24 module can be used only in combination with the tML® HD patch cord.
The end faces of the connectors are optimized by means of Lasercleaving and machine polish. The MPO/MTP® plug has a defined fiber height of 1 - 3.5µ. The max. adjacent fiber height difference is 0.2µm and for all fibers 0.3µm. All system components (modules, trunk cables and patch cords) are co-ordinated for the reaching of the performance particularly. The module is marked with sequential serial number and article number. The modules are ROHS compliant.
|Entry||1 x MPO/MTP® Female Adapter (red) back|
|Exit||12 x LC Duplex Adapter with self-closing shutter (magenta) front|
Interferometer, Insertion Loss, Return Loss and Visual Final Inspection; all measured values are electronically archived
|QS-Managementsystem ISO 9001, ISO 14001 and TL 9000|
Type MPO/MTP® Application Singlemode / Multimode Design without Flange Connector style SC Simplex Key Orientation Type A, Key up/down Color Red Material Plastic Sleeve -- Shutter -- Standards IEC 61754-7
Manufacturer US Conec
When the connector is inserted into the adapter it compress the springs, opening the internal shutter. The internal shutter opens, and due to the special design of the shutter, it will not touch the ferrule end face. As the connector is removed from the adapter, the shutter spring automatically returns the internal shutter to the closed position.
Type LC Duplex Application Multimode OM4 Design One-Piece without flange Connector style SC simplex Color Magenta Housing material Plastic Sleeve Zirkonia Staight Split Self-closing shutter material Metal Self-closing shutter protection Dust an laser light Manufacturer tde
The end faces of the connectors are optimized by means of Lasercleaving and machine polish. The MPO/MTP® plug has a defined fiber height of 1 - 3.5µ. The max. adjacent fiber height difference is 0.2µm and for all fibers 0.3µm.
Connector Type MPO/MTP® Female Push Pull Locking (magenta) Ferrule 24 Fiber MM Elite® ferrule, PPS Boot colour Red Temperature range -40°C to +75°C Manufacturer tde/US Conec Optical Performance Fiber Type Wavelength Insertion loss typ. Insertion loss max. Return loss min. 50/125µ OM4
≤ 0.12 dB
0.25 dB 35 dB Connector Type LC Unibody Simplex Housing Plastic, Magenta Ferrule Zirkonia Staight Split, Spring-loaded Axially Ferrule Hole 126 µ Mating Cycles 1.000 Operating Temperature -40°C up to +75°C Strain Relief to 100 N Manufacturer tde Optical performance Fiber Type Wavelength Insertion loss typ. Insertion loss max. Return loss min. 50/125µ OM4 LC 850 / 1300 nm ≤ 0.07 dB 0.15 dB 35 dB
Type Draka OM4 50/125µm bend-insensitive multimode fiber (C32) Standards and Norms IEC 60793-2-10: type A1a.3 ITU G.651.1 TIA/EIA-492 AAAD ISO/IEC 11801 category OM4 EN 60793-2-10: type A1a.3 ANSI/TIA/EIA-568.C ISO/IEC 24764 EN 50173-1 category OM4 IEEE 802.3 Optical properties Maximum attenuation value of cable at 850 nm IEC 60793-1-40 ≤ 3.0 dB/km Maximum attenuation value of cable at 1300 nm IEC 60793-1-40 ≤ 1.0 dB/km Attenuation limit according to IEC 60793-2-10, 850 nm IEC 60793-1-40 ≤ 2.5 dB/km Attenuation limit according to IEC 60793-2-10, 1300 nm IEC 60793-1-40 ≤ 0.8 dB/km Inhomogeneity of OTDR trace for any two 1000 metre fiber lengths IEC 60793-1-40 Max. 0.1 dB/km Fiber bending loss R=7.5 mm 850/1300 nm IEC 60793-1-40 ≤ 0.2 dB / ≤ 0.5 dB Fiber bending loss R=15 mm 850/1300 nm IEC 60793-1-40 ≤ 0.1 dB / ≤ 0.3 dB Bandwidth Overfilled (OFL) modal bandwidth at 850 nm IEC 60793-1-41 ≥ 3500 MHz*km Overfilled (OFL) modal bandwidth at 1300 nm IEC 60793-1-41 ≥ 500 MHz*km Effective Modal Bandwidth (EMB) at 850 nm IEC 60793-1-49 ≥ 4700 MHz*km Group index of refraction at 850 nm IEC 60793-1-22 1.482 Group index of refraction at 1300 nm IEC 60793-1-22 1.477 Geometrical / mechanical properties Core diameter IEC/EN 60793-1-20 50 ± 2 µm Cladding diameter IEC/EN 60793-1-20 125.0 ± 1.0 µm Cladding non-circularity IEC/EN 60793-1-20 ≤ 0.7% Core non-circularity IEC/EN 60793-1-20 ≤ 5% Core -cladding concentricity error IEC/EN 60793-1-20 ≤ 1 µm Primary coating diameter - uncoloured IEC/EN 60793-1-21 242 ± 5 µm Primary coating diameter - coloured IEC/EN 60793-1-21 250 ± 15 µm Primary coating non-circularity IEC/EN 60793-1-21 ≤ 5% Primary coating-cladding concentricity error IEC/EN 60793-1-21 ≤ 6 µm Proof stress level IEC/EN 60793-1-30 ≥ 0.7 (≈ 1 %) GPa Typical average strip force IEC/EN 60793-1-32 1.7 N Strip force (peak) IEC/EN 60793-1-32 1.3 N ≤ Fpeak.strip ≤ 8.9 N Numerical aperture IEC/EN 60793-1-43 0.200 ± 0.015
|Box||Galvanized steel sheet|
|Front Panel||Stainless steel|
|Dimensions||110 x 108 x 20 mm|