tML® 24 - FO Modules MPO/MTP®
tML® 24- FO Dark Fiber Module 4x 24F MPO without Pins/12x 12F MPO with Pins 50/125µ OM4, SR4
P/N: TML-M12MPP/04M2-50G4
tML® 24- FO Dark Fiber Module 4x 24F MPO without Pins/12x 12F MPO with Pins 50/125µ OM4, SR4
Description
The tML® - FO Dark Fiber Module MPO/MTP® uses all the fibers of the back room cabling and is intended for the installation in the tML® Rack Mount Enclosure 1U (for 8 x Modules).
Technical data
The end faces of the connectors are optimized by means of Lasercleaving and machine polish. The MPO/MTP® plug has a defined fiber hieght of 1 - 3.5µ. The max. adjacent fiber height difference is 0.2µm and for all fibers 0.3µm. All system components (modules, trunk cables and patch cords) are co-ordinated for the reaching of the performance particularly. The module is marked with sequential serial number and article number. The modules are ROHS compliant.
| Entry | 4 x MPO/MTP® (24 Fibers) Female Adapter (red) back |
| Exit | 12 x MPO/MTP® (12 Fibers) Male Adapter (magenta) front |
| Tests |
Interferometer, Insertion Loss, Return Loss and Visual Final Inspection; all measured values are electronically archived |
| QS-Managementsystem ISO 9001, ISO 14001 and TL 9000 |
-
Type MPO/MTP® Application Singlemode / Multimode Design without Flange Connector style SC Simplex Key Orientation Type A, Key up/down Color Red Material Plastic Sleeve -- Shutter -- Standards IEC 61754-7
TIA 604-5Manufacturer US Conec Type MPO/MTP® Application Multimode OM4 Design without Flange Connector style SC Simplex Key Orientation Type A, Key up/down Color Magenta Material Plastic Sleeve -- Shutter -- Standards IEC 61754-7
TIA 604-5Manufacturer US Conec -
The end faces of the connectors are optimized by means of Lasercleaving and machine polish. The MPO/MTP® plug has a defined fiber height of 1 - 3.5µ. The max. adjacent fiber height difference is 0.2µm and for all fibers 0.3µm.
Connector Type MPO/MTP® Female Push Pull Locking (magenta) Ferrule 24 Fiber MM Elite® ferrule, PPS Boot colour Red Temperature range -40°C to +75°C Manufacturer tde/US Conec Optical Performance Fiber Type Wavelength Insertion loss typ. Insertion loss max. Return loss min. 50/125µ OM4 MPO/MTP®
850 nm ≤ 0.12 dB
0.25 dB 35 dB The end faces of the connectors are optimized by means of Lasercleaving and machine polish. The MPO/MTP® plug has a defined fiber height of 1 - 3.5µ. The max. adjacent fiber height difference is 0.2µm and for all fibers 0.3µm.
Connector Type MPO/MTP® Male Push Pull Locking with Elite Pins (magenta) Ferrule 12 Fiber MM Elite® ferrule, PPS Boot colour Black Manufacturer tde/US Conec Optical Performance FiberTypeWavelengthInsertion loss typ.Insertion loss max.Return loss min.50/125µ OM4MPO/MTP®850 /1300 nm ≤ 0.12 dB0.25 dB35 dB -
Type Corning ClearCurve® 50/125µ OM4 multimode fiber Optimized Data Rate over Distance 40/100 Gb over 170 m*
10 Gb/s over 550 m
1 Gb/s over 1100 mStandard Compliance ISO/IEC 11801: type OM4 fiber**
IEC 60793-2-10: type A1a.3 fiber**
TIA/EIA: 492AAAD
ITU: ITU G651.1* Distances specified in the 40G/100G per IEEE 802.3ba standard are 150m on OM4 and 100m on OM3; Corning fibers are manufactured to tighter dispersion specifications and thereby support the extended distances shown in the table (assuming cable attenuation ≤3.0 dB/km and same 1.0 dB of connector loss for OM3 that the standard requires for OM4) ** Assumes IEC draft standard is harmonized with 492AAAD which was approved by TIA Optical Specifications Bandwidth High Performance EMB* (MHz.km): 4700 at 850 nm only
Legacy Performance EMB** (MHz.km): 3500 at 850 nm / 500 at 1300 nmAttenuation At 850 nm max. ≤ 2.3 dB/km
At 1300 nm max. ≤ 0.6 dB/kmMacrobend Loss Mandrel Radius (mm): 37.2 / 15 / 7.5
Number of Turns: 100 / 2 / 2
Induced Attenuation (dB) at 850 nm: ≤ 0.05 / ≤ 0.1 / 0.2
Induced Attenuation (dB) at 1300 nm: ≤ 0.15 / ≤ 0.3 / ≤ 0.5Numerical Aperture 0.200 ± 0.015 * Ensured via miniEMBc, per TIA/EIA 455-220A and IEC 60793-1-49, for high performance laser-based systems (up to 10Gb/s) ** OFL BW, per TIA/EIA 455-204 and IEC 60793-1-41, for legacy and LED-based systems (typically up to 100 Mb/s) Dimensional Specifications Core Diameter 50.0 ± 2.5 µm Cladding Diameter 125.0 ± 1.0 µm Core-Clad Concentricity ≤ 1.5 µm Cladding Non-Circularity ≤ 1.0% Core Non-Circularity ≤ 5.0% Coating Diameter 242 ± 5 µm Coating-Cladding Concentricity < 12 µm Environmental Enviromental Test Test Condition Induced Attenuation 850 nm & 1300 nm (dB/km) Temperature Dependence -60°C to +85°C ≤ 0.10 Temperature Humidity Cycling -10°C to +85°C and 4% to 98% RH ≤ 0.10 Water Immersion 23°C ± 2°C ≤ 0.20 Heat Aging 85°C ± 2°C ≤ 0.20 Damp Heat 85°C at 85% RH ≤ 0.20 Operating Temperature Range -60°C to +85°C Mechanical Specifications Proof Test The entire fiber length is subjected to a tensile stress ≥ 100 kpsi (0.7 GN/m²). Length Fiber lengths available up to 17.6 km/spool. Performance Characterizations Refractive Index Difference 1% Effective Group Index of Refraction 850 nm: 1.480
1300 nm: 1.479Fatigue Resistance Parameter (nd) 20 Coating Strip Force Dry: 0.6 lbs (2.7N)
Wet: 14 days in 23°C water soak: 0.6 lbs (2.7N)Cromatic Dispersion Zero Dispersion Wavelength (λ0): 1295 nm ≤ λ0 ≤ 1315 nm
Zero Dispersion Slope (S0): ≤ 0.101 ps/(nm²*km)
| Box | Galvanized steel sheet |
| Front Panel | Stainless steel |
| Dimensions | 110 x 108 x 20 mm |
