FO Splice Boxes

tBL® - FO Splice box 19'' 1U MM 12x ST OM3, splice ready prepared

P/N: TBL-F24-12ST50-3S

Description

19'' Splice box with extendable drawer and cover. For up to 24 x FO adapters, 1U 210mm deep. The splice box is optional equipped with colored fiber pigtails and splice ready prepared.

Technical data

Pre-mounted 12 ST adapters MM
12 ST Fiber pigtails 50/125µ OM3 2.0 meters 12 x Colors, splice ready prepared
12 Crimp Splice protectors
1 Splice cassettes
1 Splice holder
1 Splice cover
1 Glands M20 for cable entry
1 set cage nuts and screws (M5)
Alternative pre-mounted

TBL-F24-xxST50-3yz (see below)

xx (01 - 24) quantity of adapters
y (S)plice ready prepared
z With(O)ut Crimp Splice protectors
  • Housing Sheet steel, extendable drawer, front panel removable
    Color RAL 7035
    Cable entry On the back: Each over 2x metric cable glands (left and right)
    Dimensions 19'' 1U 210mm depth
    Front panel color RAL 7035 light grey matt
    Labeling 1 - 24 silk screen
    Configuration Attachment up to 24x ST Adapter
  • Type ST Simplex
    Application Singlemode OS2 PC, Multimode OM3/OM4
    Design --
    Connector style ST Simplex
    Material Metal
    Sleeve Zirconia Straight Split
    Shutter --
    Manufacturer tde
  • Type Splice cassette
    Dimensions 155 x 92 x 8 mm
    Material Bright ABS, similar RAL 1013
    Type FO Splice holder for 12 x Crimp splice protectors
    Dimensions 40 x 26 x 6 mm
    Material Bright ABS, similar RAL 1013
    Type Crimp splice protector
    Dimensions 31 x 3 x 1 mm
    Type Cassette cover long
    Dimensions 155 x 92 x 2 mm
    Material Bright ABS, similar RAL 1013
    Type Cable tie
    Dimensions 75 x 2.5 mm
    Type Locknut for cable gland M20
    Color light grey
    Type Cable gland M20
    Color light grey
    Type FO Blind stopper
    Application For covering of unused adapter slots
    Type Mounting set M5
      Set of 4 (cage nuts and screws)
  • Connector Type ST
    Housing Metal
    Ferrule Zirconia Straight Split
    Ferrule Hole 126 µ
    Mating Cycles 1.000
    Operating Temperature -40°C up to +75°C
    Strain Relief to 150 N
    Manufacturer tde
    Optical performance
    FiberTypeWavelengthInsertion loss typ.Insertion loss max.Return loss min.
    50/125µ OM3 ST 850 nm ≤ 0.25 dB 0.45 dB 30 dB
  • Tight Buffer Low smoke (IEC 61034 and EN 50268) and free of halogens (LS0H)
      Non corrosive after IEC 60754-2 and EN 50267
      Flame resistent after IEC 60332-3C and EN 50266-2-4
      Completly dry design
      Free from metal, no grounding problems and potential differences
      Tight Buffer for simple and direct connector mounting

     

    Characteristics
    Fiber Count 1 (Tight Buffer)
    Core-Ø 0.9 mm
    Coreweight 1 kg/km
    Min. Bending radius - Installation 30 mm
    Min. Bending radius - Operation 30 mm
    Removal 1500 mm

    Fire load

    0.15 MJ/m

    Temperature range - Installation

    -5 to +50°C

    Temperature range - Operation

    -20 to +60°C

    Temperature range - Transport / Lagerung

    -25 to +70°C
  • Type Corning ClearCurve® 50/125µ OM3 multimode fiber
    Optimized Data Rate over Distance 40/100 Gb/s über 140 m*
    10 Gb/s over 300 m
    1 Gb/s over 1000 m 
    Standard Compliance ISO/IEC 11801: type OM3 fiber
    IEC 60793-2-10: type A1a.2 fiber
    TIA/EIA: 492AAAC-B
    ITU: ITU G651.1

    *

    Distances specified in the 40G/100G per IEEE 802.3ba standard are 150m on OM4 and 100m on OM3; Corning fibers are manufactured to tighter dispersion specifications and thereby support the extended distances shown in the table (assuming cable attenuation ≤3.0 dB/km and same 1.0 dB of connector loss for OM3 that the standard requires for OM4).

    Optical Specifications
    Bandwidth High Performance EMB* (MHz.km): 2000 at 850 nm only
    Legacy Performance EMB* (MHz.km): 1500 at 850 nm / 500 at 1300 nm  
    Attenuation At 850 nm max. ≤ 2.3 dB/km
    At 1300 nm max. ≤ 0.6 dB/km
    Macrobend Loss Mandrel Radius (mm): 37.5 / 15 / 7.5
    Number of Turns: 100 / 2 / 2
    Induced Attenuation (dB) at 850 nm: ≤ 0.05 / ≤ 0.1 / ≤ 0.2
    Induced Attenuation (dB) at 1300 nm: ≤ 0.15 / ≤ 0.3 / ≤ 0.5
    Numerical Aperture 0.200 ± 0.015
    * Ensured via miniEMBc, per TIA/EIA 455-220A and IEC 60793-1-49, for high performance laser-based systems (up to 10 Gb/s).
    ** OFL BW, per TIA/EIA 455-204 and IEC 60793-1-41, for legacy and LED-based systems (typically up to 100 Mb/s).
    Dimensional Specifications
    Core Diameter 50.0 ± 2.5 µm
    Cladding Diameter 125.0 ± 1.0 µm
    Core-Clad Concentricity ≤ 1.5 µm
    Cladding Non-Circularity ≤ 1.0%
    Core Non-Circularity ≤ 5.0%
    Coating Diameter 242 ± 5 µm
    Coating-Cladding Concentricity < 12 µm
    Environmental
    Enviromental TestTest ConditionInduced Attenuation 850 nm & 1300 nm (dB/km)
    Temperature Dependence -60°C to +85°C ≤ 0.10
    Temperature Humidity Cycling -10°C to +85°C and 4% to 98% RH ≤ 0.10
    Water Immersion 23°C ± 2°C ≤ 0.20
    Heat Aging 85°C ± 2°C ≤ 0.20
    Damp Heat 85°C at 85% RH ≤ 0.20
    Operating Temperature Range -60°C to +85°C   
    Mechanical Specifications
    Proof Test The entire fiber length is subjected to a tensile stress ≥ 100 kpsi (0.7 GN/m²).
    Length Fiber lengths available up to 17.6 km/spool.
    Performance Characterizations
    Refractive Index Difference 1%
    Effective Group Index of Refraction 850 nm: 1.480
    1300 nm: 1.479
    Fatigue Resistance Parameter (nd) 20
    Coating Strip Force Dry: 0.6 lbs (2.7N)
    Wet: 14 days in 23°C water soak: 0.6 lbs (2.7N)
    Cromatic Dispersion Zero Dispersion Wavelength (λ0): 1295 nm ≤ λ0 ≤ 1315 nm
    Zero Dispersion Slope (S0): ≤ 0.101 ps/(nm²*km)
P/N Description Quantity
TBL-F24-12ST50-3S tBL® - FO Splice box 19'' 1U MM 12x ST OM3, splice ready prepared
TBL-F24-12ST50S tBL® - FO Splice box 19'' 1U MM 12x ST OM2, splice ready prepared
TBL-F24-12ST62S tBL® - FO Splice box 19'' 1U MM 12x ST OM1, splice ready prepared
TBL-F24-12ST9S tBL® - FO Splice box 19'' 1U MM 12x ST OS2, splice ready prepared

back

Datasheet

Announcement texts