FO DIN rail splice module Premium
tBL® - DIN rail splice housing SM 3x LC APC Duplex OS2, splice ready prepared
P/N: TBL-H06-03LCAD9APS
Note: pay attention to the colors specified in the item description
tBL® - DIN rail splice housing SM 3x LC APC Duplex OS2, splice ready prepared
Technical data
| Pre-mounted | 3 LC duplex adapters SM 6 LC APC Fiber pigtails 9/125µ OS2 2.0 meters 12 x Colors, splice ready prepared 6 Crimp Splice protectors 1 Splice cassette 1 Splice holder 1 Cabel entry vertical 1 Mounting clip (for mounting on rail housing) 1 Gland M20 for cable entry |
| Alternative pre-mounted |
TBL-H06-xxLCAD9APyz (see below) |
| xx | (01 - 06) quantity of adapters |
| y | (S)plice ready prepared |
| z | With(O)ut Crimp Splice protectors |
-
Housing Alu-sheet, 1 mm Dimensions 141.4 x 141 x 42.8 mm Colour powdered in RAL 7035 (grey) Front panel Alu-sheet incl. labeling strip Configuration Attachment up to 6x LC Duplex, 6x SC Simplex or 6x E2000 Simplex adapters -
Type LC Duplex Application Singlemode OS2 APC Design One-Piece with flange Connector style SC Simplex Color Green Material Plastic Sleeve Zirconia Straight Split Shutter - Manufacturer tde -
Type splice cassette for DIN rail splice housing Material sheet steel Colour powdered in RAL 9005 (black) Configuration uo to 2x 12 splices Type FO Splice holder for 12 x Crimp splice protectors Dimensions 40 x 26 x 6 mm Material Bright ABS, similar RAL 1013 Type Crimp splice protector Dimensions 31 x 3 x 1 mm -
Connector Type LC APC Unibody Simplex Housing Plastic, Green Ferrule Zirconia Straight Split, Spring-loaded Axially Ferrule Hole 125.5 µ Ferrule Concentricity ≤ 0.6 µ Mating Cycles 500 Operating Temperature -40°C up to +75°C Strain Relief to 100 N Manufacturer tde Optical performance Fiber Type Wavelength Insertion loss typ. Insertion loss max. Return loss min. 9/125µ LC APC 1310 / 1550 nm ≤ 0.10 dB 0.18 dB 75 dB -
Tight Buffer Low smoke (IEC 61034 and EN 50268) and free of halogens (LS0H) Non corrosive after IEC 60754-2 and EN 50267 Flame resistent after IEC 60332-3C and EN 50266-2-4 Completly dry design Free from metal, no grounding problems and potential differences Tight Buffer for simple and direct connector mounting Characteristics Fiber Count 1 (Tight Buffer) Core-Ø 0.9 mm Coreweight 1 kg/km Min. Bending radius - Installation 30 mm Min. Bending radius - Operation 30 mm Removal 1500 mm Fire load
0.15 MJ/m Temperature range - Installation
-5 to +50°C Temperature range - Operation
-20 to +60°C Temperature range - Transport / Lagerung
-25 to +70°C -
Type Corning Ultra SMF-28® 09/125µ OS2 singlemode fiber Maximum Attenuation At 1310 nm max. 0.32 dB/km
At 1383 nm max. 0.32 dB/km
At 1490 nm max. 0.21 dB/km
At 1550 nm max. 0.18 dB/km
At 1625 nm max. 0.20 dB/kmAttenuation vs. Wavelength Range: 1285 - 1330 mm; Ref. λ: 1310 nm; Max. α Difference: 0.03 dB/km
Range: 1525 - 1575 mm; Ref. λ: 1550 nm; Max. α Difference: 0.02 dB/kmMacrobend Loss Mandrel Radius: 10mm; Number of Turns: 1; Wavelength: 1550nm; Induced Attenuation: ≤ 0.50 dB
Mandrel Radius: 10mm; Number of Turns: 1; Wavelength: 1625nm; Induced Attenuation: ≤ 1.5 dB
Mandrel Radius: 15mm; Number of Turns: 10; Wavelength: 1550nm; Induced Attenuation: ≤ 0.05 dB
Mandrel Radius: 15mm; Number of Turns: 10; Wavelength: 1625nm; Induced Attenuation: ≤ 0.30 dB
Mandrel Radius: 25mm; Number of Turns: 100; Wavelength: 1310nm, 1550nm, 1625nm; Induced Attenuation: ≤ 0.01 dBPoint Discontinuity Wavelength: 1310 nm; Point Discontinuity: ≤ 0.05 dB
Wavelength: 1550 nm; Point Discontinuity: ≤ 0.05 dBCable Cutoff Wavelength (λccf) λccf ≤ 1260 nm Mode-Field Diameter At 1310 nm = 9.2 ± 0.4 µm
At 1550 nm = 10.4 ± 0.5 µmDispersion At 1550 nm = ≤ 18.0 [ps/(nm*km)]
At 1625 nm = ≤ 22.0 [ps/(nm*km)]Zero Dispersion Wavelength (λ0): 1304 nm ≤ λ0 ≤ 1324 nm
Zero Dispersion Slope (S0): ≤ 0.092 ps/(nm² *km)Polarization Mode Dispersion (PMD) PMD Link Design Value = ≤ 0.04 ps/√km
Maximum Individual Fiber = ≤ 0.1 ps/√kmDimensional Specifications Fiber Curl ≥ 4.0 m radius of curvature Cladding Diameter 125.0 ± 0.7 µm Core-Clad Concentricity ≤ 0.5 µm Cladding Non-Circularity ≤ 0.7% Coating Diameter 242 ± 5 µm Coating-Cladding Concentricity < 12 µm Environmental Specifications Environmental Test Test Condition Induced Attenuation 1310 nm, 1550 nm & 1625 nm Temperature Dependence -60°C to +85°C ≤ 0.05 Temperature Humidity Cycling -10°C to +85°C up to 98% RH ≤ 0.05 Water Immersion 23°C ± 2°C ≤ 0.05 Heat Aging 85°C ± 2°C ≤ 0.05 Operating Temperature Range -60°C to +85°C Mechanical Specifications Proof Test The entire fiber length is subjected to a tensile stress ≥ 100 kpsi (0.69 GPa). Length Fiber lengths available up to 63.0 km/spool. Performance Characterizations Core Diameter 8.2 µm Numerical Aperture 0.14 Effective Group Index of Refraction 1310 nm: 1.4676
1550 nm: 1.4682Fatigue Resistance Parameter (nd) 20 Coating Strip Force Dry: 0.6 lbs (3N)
Wet: 14 days room temperature: 0.6 lbs (3N)Rayleigh Backscatter Coefficient (for 1 ns Pulse Width) 1310 nm: -77 dB
1550 nm: -82 dB
