FO DIN rail splice module Premium

tBL® - DIN rail splice housing MM 6x LC Duplex OM4, splice ready prepared

P/N: TBL-H06-06LCD50-4PS

Technical data

Pre-mounted 6 LC duplex adapters MM
12 LC Fiber pigtails 50/125µ OM4 2.0 meters tde attenuation class B, splice ready prepared
12 Crimp Splice protectors
1 Splice cassette
1 Splice holder
1 Cabel entry vertical
1 Mounting clip (for mounting on rail housing)
1 Gland M20 for cable entry
Alternative pre-mounted

TBL-H06-xxLCD50-4Pyz (see below)

xx (01 - 06) quantity of adapters
y (S)plice ready prepared
z With(O)ut Crimp Splice protectors
  • Housing Alu-sheet, 1 mm
    Dimensions 141.4 x 141 x 42.8 mm
    Colour powdered in RAL 7035 (grey)
    Front panel Alu-sheet
      incl. labeling strip
    Configuration Attachment up to 6x LC Duplex, 6x SC Simplex or 6x E2000 Simplex adapters
  • Type LC Duplex
    Application Multimode OM4
    Design One-Piece with Flange
    Connector style SC Simplex
    Color Magenta
    Material Plastic
    Sleeve Zirkonia Staight Split
    Shutter -
    Manufacturer tde


  • Type splice cassette for DIN rail splice housing
    Material sheet steel
    Colour powdered in RAL 9005 (black)
    Configuration uo to 2x 12 splices
    Type FO Splice holder for 12 x Crimp splice protectors
    Dimensions 40 x 26 x 6 mm
    Material Bright ABS, similar RAL 1013
    Type Crimp splice protector
    Dimensions 31 x 3 x 1 mm
  • Connector Type LC Unibody Simplex
    Housing Plastic, Magenta
    Ferrule Zirkonia Staight Split, Spring-loaded Axially
    Ferrule Hole 126 µ
    Mating Cycles 1.000
    Operating Temperature -40°C up to +75°C
    Strain Relief to 100 N
    Manufacturer tde
    Optical performance
    FiberTypeWavelengthInsertion loss typ.Insertion loss max.Return loss min.
    50/125µ OM4 LC 850 / 1300 nm ≤ 0.07 dB 0.15 dB 35 dB
  • Tight Buffer Low smoke (IEC 61034 and EN 50268) and free of halogens (LS0H)
      Non corrosive after IEC 60754-2 and EN 50267
      Flame resistent after IEC 60332-3C and EN 50266-2-4
      Completly dry design
      Free from metal, no grounding problems and potential differences
      Tight Buffer for simple and direct connector mounting

     

    Characteristics
    Fiber Count 1 (Tight Buffer)
    Core-Ø 0.9 mm
    Coreweight 1 kg/km
    Min. Bending radius - Installation 30 mm
    Min. Bending radius - Operation 30 mm
    Removal 1500 mm

    Fire load

    0.15 MJ/m

    Temperature range - Installation

    -5 to +50°C

    Temperature range - Operation

    -20 to +60°C

    Temperature range - Transport / Lagerung

    -25 to +70°C
  • Type Corning ClearCurve® 50/125µ OM4 multimode fiber
    Optimized Data Rate over Distance 40/100 Gb over 170 m*
    10 Gb/s over 550 m
    1 Gb/s over 1100 m
    Standard Compliance ISO/IEC 11801: type OM4 fiber**
    IEC 60793-2-10: type A1a.3 fiber**
    TIA/EIA: 492AAAD
    ITU: ITU G651.1
    * Distances specified in the 40G/100G per IEEE 802.3ba standard are 150m on OM4 and 100m on OM3; Corning fibers are manufactured to tighter dispersion specifications and thereby support the extended distances shown in the table (assuming cable attenuation ≤3.0 dB/km and same 1.0 dB of connector loss for OM3 that the standard requires for OM4)
    ** Assumes IEC draft standard is harmonized with 492AAAD which was approved by TIA
    Optical Specifications
    Bandwidth High Performance EMB* (MHz.km): 4700 at 850 nm only
    Legacy Performance EMB** (MHz.km): 3500 at 850 nm / 500 at 1300 nm
    Attenuation At 850 nm max. ≤ 2.3 dB/km
    At 1300 nm max. ≤ 0.6 dB/km
    Macrobend Loss Mandrel Radius (mm): 37.2 / 15 / 7.5
    Number of Turns: 100 / 2 / 2
    Induced Attenuation (dB) at 850 nm: ≤ 0.05 / ≤ 0.1 /  0.2 
    Induced Attenuation (dB) at 1300 nm: ≤ 0.15 / ≤ 0.3 / ≤ 0.5
    Numerical Aperture 0.200 ± 0.015
    * Ensured via miniEMBc, per TIA/EIA 455-220A and IEC 60793-1-49, for high performance laser-based systems (up to 10Gb/s)
    ** OFL BW, per TIA/EIA 455-204 and IEC 60793-1-41, for legacy and LED-based systems (typically up to 100 Mb/s)
    Dimensional Specifications
    Core Diameter 50.0 ± 2.5 µm
    Cladding Diameter 125.0 ± 1.0 µm
    Core-Clad Concentricity ≤ 1.5 µm
    Cladding Non-Circularity ≤ 1.0%
    Core Non-Circularity ≤ 5.0%
    Coating Diameter 242 ± 5 µm
    Coating-Cladding Concentricity < 12 µm
    Environmental
    Enviromental TestTest ConditionInduced Attenuation 850 nm & 1300 nm (dB/km)
    Temperature Dependence -60°C to +85°C ≤ 0.10
    Temperature Humidity Cycling -10°C to +85°C and 4% to 98% RH ≤ 0.10
    Water Immersion 23°C ± 2°C ≤ 0.20
    Heat Aging 85°C ± 2°C ≤ 0.20
    Damp Heat 85°C at 85% RH ≤ 0.20
    Operating Temperature Range -60°C to +85°C   
    Mechanical Specifications
    Proof Test The entire fiber length is subjected to a tensile stress ≥ 100 kpsi (0.7 GN/m²).
    Length Fiber lengths available up to 17.6 km/spool.
    Performance Characterizations
    Refractive Index Difference 1%
    Effective Group Index of Refraction 850 nm: 1.480
    1300 nm: 1.479
    Fatigue Resistance Parameter (nd) 20
    Coating Strip Force Dry: 0.6 lbs (2.7N)
    Wet: 14 days in 23°C water soak: 0.6 lbs (2.7N)
    Cromatic Dispersion Zero Dispersion Wavelength (λ0): 1295 nm ≤ λ0 ≤ 1315 nm
    Zero Dispersion Slope (S0): ≤ 0.101 ps/(nm²*km)
P/N Description Quantity
TBL-H06-06LCAD9APS tBL® - DIN rail splice housing SM 6x LC APC Duplex OS2, splice ready prepared
TBL-H06-06LCD50-3PS tBL® - DIN rail splice housing MM 6x LC Duplex OM3, splice ready prepared
TBL-H06-06LCD50-4PS tBL® - DIN rail splice housing MM 6x LC Duplex OM4, splice ready prepared
TBL-H06-06LCD9PS tBL® - DIN rail splice housing SM 6x LC Duplex OS2, splice ready prepared

back

Datasheet

Announcement texts