FO MPO/MTP® Premium

FO Mini Fanout MPO24 Male/2x MPO12 Male 24G50/125µ OM4 100GbE, Type A, Length: xxx

P/N: P-M2P/MPP50I24G4Axxx

Technical data

The end faces of the connectors are optimized by means of Lasercleaving and machine polish. The MPO/MTP® plug has a defined fiber height of 1 - 3.5µ. The max. adjacent fiber height difference is 0.2µm and for all fibers 0.3µm.

Cable Round cable 3.6 mm, loose tube, LSOH, magenta
Connectors MPO/MTP® Male Push Pull (magenta)
Pin out Method A
Tests Interferometer, Insertion Loss, Return Loss and Visual Final Inspection; all measured values are electronically archived
  QS-Managementsystem ISO 9001, ISO 14001 and TL 9000

xxx - stands for the cable length in m (every length available)

  • The end faces of the connectors are optimized by means of Lasercleaving and machine polish. The MPO/MTP® plug has a defined fiber height of 1 - 3.5µ. The max. adjacent fiber height difference is 0.2µm and for all fibers 0.3µm.

    Connector
    Type MPO/MTP® Male Push Pull Locking with Elite Pins (magenta)
    Ferrule 24 Fiber MM Elite® ferrule, PPS
    Boot colour Red
    Temperature range -40°C to +75°C
    Manufacturer tde/US Conec
    Optical Performance
    Fiber
    Type
    Wavelength
    Insertion loss typ.
    Insertion loss max.
    Return loss min.
    50/125µ OM4
    MPO/MTP®
    850 nm
    ≤ 0.12 dB
    0.25 dB
    35 dB

    The end faces of the connectors are optimized by means of Lasercleaving and machine polish. The MPO/MTP® plug has a defined fiber height of 1 - 3.5µ. The max. adjacent fiber height difference is 0.2µm and for all fibers 0.3µm.

    Connector
    Type MPO/MTP® Male Push Pull Locking with Elite Pins (magenta)
    Ferrule 12 Fiber MM Elite® ferrule, PPS
    Boot colour Black
    Manufacturer tde/US Conec
    Optical Performance
    Fiber
    Type
    Wavelength
    Insertion loss typ.
    Insertion loss max.
    Return loss min.
    50/125µ OM4
    MPO/MTP®
    850 /1300 nm
    ≤ 0.12 dB
    0.25 dB
    35 dB
  • Length Fan-Out 40 mm
    Max. Ø Fan-Out 10 mm
    Parallel connectors 2
  • Standards EN 50173-5
      IEC 60794-2-20
      ISO/IEC 24764
    Construction
    Type IVH24G50-OM4
    Fiber 24 primary coated fibres nominally 242 μm, arranged in 2 groups of 12 fibres,
    Group 1: Red id tread
    Group 2: Green id tread
    Fiber colors According to TIA/EIA 598-C also in agreement with IEC 60304:
    1-12: Blue, orange, green, brown, grey, white, red, black, yellow, violet, pink and aqua
      13-24: Blue, orange, green, brown, grey, white, red, transparent, yellow, violet, pink and aqua (with add. ring mark)
    Strength member Ultra high modulus Aramid yarns
    Sheath Halogen free, flame resistant thermoplastic sheathing compound acc. to EN 50290-2-27, UV stabilised
    Sheath colors Magenta, RAL 4003
    Fire rating
    IEC 60332-1-2 Pass
    IEC 60332-2-2 Pass
    IEC 60754-1 No halogens
    IEC 60754-2 No acid matters
    IEC 61034-2 No dense smoke
    Heat of combustion
    200 MJ/km 0.5 KWh/m
    Physical properties IEC60974-1-2
    Outer diameter cable ø3.6 mm +0.1 mm -0.3 mm
    Diameter PVC-core tube 2.0 ± 0.1 mm
    Wall thickness PVC-core tube 0.35 mm – 0.40 mm
    Weight 11 kg/km
    Tensile strength (dynamic) 220 N
    Tensile strength (permanent) 110 N
    Compressive strength (crush) 400 N
    Impact 4 Nm, R= 12.5 mm
    Kink No Kink
    Min. Bending radius R = 20 mm
    Temperature range Operation and installation: -0°C to 50°C.
    Storage: -20°C to 50°C
  • Type Corning ClearCurve® 50/125µ OM4 multimode fiber
    Optimized Data Rate over Distance 40/100 Gb over 170 m*
    10 Gb/s over 550 m
    1 Gb/s over 1100 m
    Standard Compliance ISO/IEC 11801: type OM4 fiber**
    IEC 60793-2-10: type A1a.3 fiber**
    TIA/EIA: 492AAAD
    ITU: ITU G651.1
    * Distances specified in the 40G/100G per IEEE 802.3ba standard are 150m on OM4 and 100m on OM3; Corning fibers are manufactured to tighter dispersion specifications and thereby support the extended distances shown in the table (assuming cable attenuation ≤3.0 dB/km and same 1.0 dB of connector loss for OM3 that the standard requires for OM4)
    ** Assumes IEC draft standard is harmonized with 492AAAD which was approved by TIA
    Optical Specifications
    Bandwidth High Performance EMB* (MHz.km): 4700 at 850 nm only
    Legacy Performance EMB** (MHz.km): 3500 at 850 nm / 500 at 1300 nm
    Attenuation At 850 nm max. ≤ 2.3 dB/km
    At 1300 nm max. ≤ 0.6 dB/km
    Macrobend Loss Mandrel Radius (mm): 37.2 / 15 / 7.5
    Number of Turns: 100 / 2 / 2
    Induced Attenuation (dB) at 850 nm: ≤ 0.05 / ≤ 0.1 /  0.2 
    Induced Attenuation (dB) at 1300 nm: ≤ 0.15 / ≤ 0.3 / ≤ 0.5
    Numerical Aperture 0.200 ± 0.015
    * Ensured via miniEMBc, per TIA/EIA 455-220A and IEC 60793-1-49, for high performance laser-based systems (up to 10Gb/s)
    ** OFL BW, per TIA/EIA 455-204 and IEC 60793-1-41, for legacy and LED-based systems (typically up to 100 Mb/s)
    Dimensional Specifications
    Core Diameter 50.0 ± 2.5 µm
    Cladding Diameter 125.0 ± 1.0 µm
    Core-Clad Concentricity ≤ 1.5 µm
    Cladding Non-Circularity ≤ 1.0%
    Core Non-Circularity ≤ 5.0%
    Coating Diameter 242 ± 5 µm
    Coating-Cladding Concentricity < 12 µm
    Environmental
    Enviromental TestTest ConditionInduced Attenuation 850 nm & 1300 nm (dB/km)
    Temperature Dependence -60°C to +85°C ≤ 0.10
    Temperature Humidity Cycling -10°C to +85°C and 4% to 98% RH ≤ 0.10
    Water Immersion 23°C ± 2°C ≤ 0.20
    Heat Aging 85°C ± 2°C ≤ 0.20
    Damp Heat 85°C at 85% RH ≤ 0.20
    Operating Temperature Range -60°C to +85°C   
    Mechanical Specifications
    Proof Test The entire fiber length is subjected to a tensile stress ≥ 100 kpsi (0.7 GN/m²).
    Length Fiber lengths available up to 17.6 km/spool.
    Performance Characterizations
    Refractive Index Difference 1%
    Effective Group Index of Refraction 850 nm: 1.480
    1300 nm: 1.479
    Fatigue Resistance Parameter (nd) 20
    Coating Strip Force Dry: 0.6 lbs (2.7N)
    Wet: 14 days in 23°C water soak: 0.6 lbs (2.7N)
    Cromatic Dispersion Zero Dispersion Wavelength (λ0): 1295 nm ≤ λ0 ≤ 1315 nm
    Zero Dispersion Slope (S0): ≤ 0.101 ps/(nm²*km)
P/N Description Quantity
P-M2/MP50I24G4Axxx FO Mini Fanout MPO24 Female/2x MPO12 Female 24G50/125µ OM4 100GbE, Type A, Length: xxx
P-M2/MP50I24G4Bxxx FO Mini Fanout MPO24 Female/2x MPO12 Female 24G50/125µ OM4 100GbE, Type B, Length: xxx
P-M2/MPP50I24G4Axxx FO Mini Fanout MPO24 Female/2x MPO12 Male 24G50/125µ OM4 100GbE, Type A, Length: xxx
P-M2/MPP50I24G4Bxxx FO Mini Fanout MPO24 Female/2x MPO12 Male 24G50/125µ OM4 100GbE, Type B, Length: xxx
P-M2P/MP50I24G4Axxx FO Mini Fanout MPO24 Male/2x MPO12 Female 24G50/125µ OM4 100GbE, Type A, Length: xxx
P-M2P/MP50I24G4Bxxx FO Mini Fanout MPO24 Male/2x MPO12 Female 24G50/125µ OM4 100GbE, Type B, Length: xxx
P-M2P/MPP50I24G4Axxx FO Mini Fanout MPO24 Male/2x MPO12 Male 24G50/125µ OM4 100GbE, Type A, Length: xxx
P-M2P/MPP50I24G4Bxxx FO Mini Fanout MPO24 Male/2x MPO12 Male 24G50/125µ OM4 100GbE, Type B, Length: xxx

back

Datasheet

Announcement texts