UC FUTURE - Draka Datacom Solution
Draka - UC FUTURE COMPACT AWG26 Cat.7 S/FTP 24P LSHF-FR
P/N: UC-COMPACT26X24P
Description
The solution for Data Centre cabling. A dependable, fast and always available part of Draka Datacom Solution!
For this application Draka has developed the new UCFuture program which contains slim cable designs based on existing work area cable standards, which are perfect for zone cabling in data centres because of these characteristics:
- Up to 100% higher packing density in cable trays
- Fully compliant with established cable standards
- PIMF design to eliminate any Alien-Xtalk interferences
- Full 10GBase-T performance over a channel distance of 70m
Data centre cabling 10Gbit solution. Pair screened 100 Ohms cable especially for Zone Distribution Area and Equipment Distribution Area.
Technical data
Application
IEEE 802.3: 10Base-T; 100Base-T; 10GBase-T, ISDN; xDSL
IEEE 802.5 16 MB; ISDN; TPDDI; ATM155Mbit/s
The conductor diameter is smaller compared to the standard installation cables. This leads to an increased attenuation and therefore the
operating distance is reduced (60 m instead of 90 m installation cable in standard permanent link).
Standards
IEC 61156-6 work area cable
ISO/IEC 11801 2nd ed.
EN 50173-5
EN 50288-4-2
Flame resistance
PVC IEC 60332-1
LSHF-FR IEC 60332-3-24; IEC 60754-2; IEC 61034
| Conductor | Bare copper wire, diamter 0.4 mm (AWG26) | |
| Insulation | Foam-skin PP, diameter 1.0 mm | |
| Twisting | 2 insulated wires to the pair | |
| Pair screening | Pet-Al foil around each pair | |
| Stranding | 6 (5+1) bundles with 4 foiled pairs blue, orange, green, brown | |
| Coloured tapes are around each bundle | ||
| Screen | Tinned copper braid 85% coverage | |
| Sheath | LSHF-FR, diameter 13.9 mm | |
| Minimum bending radius | Without load | ≥ 55 mm |
| With load | ≥ 110 mm | |
| Temperature range | During operation | -20°C up to +60°C |
| During installation | 10°C up to +40°C |
| Loop resistance | ≤ 280 Ω/km | |
| Resistance unbalance | ≤ 2% | |
| Test voltage | core/core | 1000 VDC 1 min |
| core/screen | 1000 VDC 1 min | |
| Capacitance | 800 Hz | Nom. 44 nF/km |
| Capacitance unbalance | ≤ 1600 pF/km | |
| Impedance | 100 MHz | 100 Ω ± 5 Ω |
| Nominal velocity of propagation | ca. 76% | |
| Insulation resistance | 500 V | ≥ 2000 MΩkm |
| Transfer impedance | at 1 MHz | ≤ 5 mΩ /m |
| at 10 MHz | ≤ 5 mΩ /m | |
| at 30 MHz | ≤ 10 mΩ /m |
| f MHZ | Atten- uation dB/10m | NEXT dB | PS- NEXT dB | ELFEXT dB/100m | PS- ELFEXT dB/100m | Return loss dB |
|---|---|---|---|---|---|---|
| 1,0 | 0,3 | 90 | 87 | 80 | 77 | 23 |
| 4,0 | 0,6 | 90 | 87 | 80 | 77 | 24 |
| 10,0 | 1,0 | 90 | 87 | 80 | 77 | 25 |
| 16,0 | 1,3 | 90 | 87 | 76 | 73 | 25 |
| 20,0 | 1,4 | 90 | 87 | 74 | 71 | 25 |
| 31,2 | 1,8 | 90 | 87 | 70 | 67 | 25 |
| 62,5 | 2,6 | 90 | 87 | 64 | 61 | 23 |
| 100,0 | 3,2 | 87 | 84 | 60 | 57 | 21 |
| 125,0 | 3,6 | 85 | 82 | 58 | 55 | 20 |
| 155,5 | 4,0 | 84 | 81 | 56 | 53 | 19 |
| 175,0 | 4,3 | 83 | 80 | 55 | 52 | 19 |
| 200,0 | 4,6 | 82 | 79 | 54 | 51 | 18 |
| 250,0 | 5,1 | 81 | 78 | 52 | 49 | 18 |
| 300,0 | 5,6 | 80 | 77 | 50 | 47 | 17 |
| 450,0 | 6,9 | 77 | 74 | 47 | 44 | 17 |
| 600,0 | 7,9 | 75 | 72 | 44 | 41 | 17 |
| Designation | Type | Outer diameter |
Fire load |
Fire load | Weight | Copper content |
Tensile force |
|---|---|---|---|---|---|---|---|
| J-09YS(ST)CH | 24x2x0,4PiMF | 13,9 mm | 2171 MJ/km | 0,603 kWh/m | 230 kg/km | 115 kg/km | 500 N |



