tde - Standard FO Cables
FO Breakout cable 24G50/125µ OM2 LSOH 2,0mm
P/N: L-IVHH24G50-2.0
FO Breakout cable 24G50/125µ OM2 LSOH 2,0mm
Description
The standard fiber optic cable types of tde specifically for the assembling of patch and adapter cables, pigtails and trunk cables has been developed. Also the use in FTTD applications inside buildings is possible. The breakout cables have up to 24 individual elements with a 2mm diameter. The overall cable diameter is very slim.
These cables are characterized by very good termination properties. The cable jacket and the secondary coating are easy removable.
Technical data
| Fiber Amount: | 24 |
| Construction: | 4 x 6 |
| Outer Diameter: | 17,4mm |
| Tolerance: | ± 0,5mm |
| Fiber Type: | MM-OM2, 50/125µ, Corning InfiniCor SX+ |
| Secondary Coating: | 900µ, easy strippable |
| Subcable Diameter: | 2,0 (± 0,1mm) |
| Strength Members: | Aramid yarns |
| Outer Jacket: | LSOH (Halogen free, low smoke, flame retardant thermoplastic compound) |
| Jacket Colour: | Orange |
| Standard printing: | “t d e – IVHH24G50-2,0” and sequential meter marking + Lot number |
| Bandwidth (MHz*Km): | ≥ 850/ ≥ 500 (850nm/1300nm) |
| Attenuation (dB/km): | 850nm (typ./max): 2,4/3,0 - 1300nm (typ./max): 0,7/1,0 |
| Numerical Apperture: | 0,200 ± 0,015 |
| Mode Field Diameter: | 50 ± 2,5µm |
| Cladding Diameter: | 125,0µm ± 1,0µm |
| Primary Coating Diameter: | 245,0µm ± 5,0µm |
| Fiber Amount: | 24 |
| Weight: | 235 kg/km |
| Tensile load: | 3200 N |
| Bending radius: | 20 x outer diamter |
| Operating temperature: | -5°C to + 60°C |
| Fire resistance: | Pass (EN 50266, IEC 60332-3) |
| Halogen content: | Free (EN 50267, IEC 60754) |
| Smoke density: | Low (EN 50268, IEC 61034-1/2) |
| Characteristics: | Fiber and aramid yarn free movable in the compound |
| Identification: | Numbers, min. every 25cm on subcables |
