tde - FO Universal cables

FO Universal Cable with non-metallic rodent protection 48G50/125µm OM2 6.0kN

P/N: L-U-DQ(ZN)BH048G50

Description

This cable can be used for LAN and WAN backbones, telecom access lines, fiber to business and fiber to the building drop connections as well as fiber to the home drop and access connections. With its FireBur® LSHF sheathing this cable is ideal for mixed indoor and outdoor installation. This cable features a high tensile strength and a degree of rodent protection, effective in many cases. It is equally suited for installation in ducts and on trays. The cable is suited for installation in tubes by blowing and flooding. The cable may be used for direct burial with proper sand back filling.

Technical data

Standards
ISO 11801 2nd edition EN 187 000
IEC 60794-2 IEC 60794-2-20
EN 50 173-1 IEC 60794-2-21

 

Construction
Central strength member ø2,5 mm FRP rod
Lose tube ø2,3 mm jelly filled loose tubes, with 2 – 12 fibers each, up to 22 tubes in two layers, for lay-up
Water blocking The core is water blocked using swellable tape and tread
Wrapping Polyester nonwoven
Strain Relief Glasroving elements
Ripcord Polyester ripcord for easy slitting of the sheath
Sheath 1,5 mm blue FireBur®, UV stabilized, EN 50290-2-27

 

Fire rating
IEC 60332-1-2 Single vertical wire test
IEC 60754-1 No halogens
IEC 60754-2 No acid matters
IEC 61034-2 No dense smoke

 

Heat of combustion
Fiber count;
6 fiber/tube
Fiber count;
8 fiber/tube
Fiber count;
12 fiber/tube
MJ/km KWh/m
6-36
8-48
12-72 2200 0,61
42-48

2900 0,81

 

Physical properties
Tensile strength (dynamic) E1 6000 N
Tensile strength (permanent) E1 4000 N
Compressive strength (crush) E3 3000N
Impact E4 25 Nm
Torsion E7 5 cycles ± 1 turn
Kink E10 The cables do not form a kink when a loop is drawn together to a diameter 12 times the cable nominal diameter
Temperature range F1 The cables can bear temperature cycling between -40°C to +70°C.
    The cables will operate without any attenuation variation (≤0,05 dB) in the temperature interval -30°C to +60°C.
    The cables will operate with a maximum attenuation variation of 0,1 dB/km in the temperature interval -40°C to +70°C.
Water penetration F5B No water on free end

 

Mechanical properties
Fiber count;
6 fiber/tube
Fiber count;
8 fiber/tube
Fiber count;
12 fiber/tube
Nominal
diameter
Nominal
cable weight
Minimum
bending radius
6-36 8-48 12-72 13,0mm 145 kg/km 160
42-48

14,5mm 180 kg/km 175

 

Fiber Characteristics
Fiber Type C08: HiCap™ premium multi mode 50 μm fiber
Fiber amount 48
Bandwidth (MHz*Km) 600/1200 (850nm/1300nm)
Attenuation (dB/km) 850nm: ≤2,7; 1300nm: ≤0,8
Numerical Apperture 0,200 ± 0,015   
Mode Field Diameter 50 ± 2,5µm
Cladding Diameter 125,0µm ± 1,0µm
Primary Coating Diameter 242,0µm ± 7,0µm
P/N Description
L-U-DQ(ZN)BH004G50     FO Universal Cable with non-metallic rodent protection 4G50/125µm OM2 1.5kN
L-U-DQ(ZN)BH008G50     FO Universal Cable with non-metallic rodent protection 8G50/125µm OM2 1.5kN
L-U-DQ(ZN)BH012G50     FO Universal Cable with non-metallic rodent protection 12G50/125µm OM2 1.5kN
L-U-DQ(ZN)BH024G50     FO Universal Cable with non-metallic rodent protection 24G50/125µm OM2 6.0kN
L-U-DQ(ZN)BH048G50     FO Universal Cable with non-metallic rodent protection 48G50/125µm OM2 6.0kN
L-U-DQ(ZN)BH072G50     FO Universal Cable with non-metallic rodent protection 72G50/125µm OM2 6.0kN
L-U-DQ(ZN)BH096G50     FO Universal Cable with non-metallic rodent protection 96G50/125µm OM2 6.0kN
L-U-DQ(ZN)BH144G50     FO Universal Cable with non-metallic rodent protection 144G50/125µm OM2 6.0kN

<<< back